Digital output table

Devices supported

ATTENTION: Digital Output values reside in table 0. Therefore, they are not applicable for controllers with a Data Table setting of Holding Registers Lower or Holding Registers Upper.

The following table lists the devices that support the Digital Output Table, and their formats.

Device	Supported Address Format	Range
DPR180	DO Digital output. Compare: AO. See also: output. [n] [param]	[n] = 1 to 36
DPR250	DO [n] [param]	[n] = 1 to 48
DR4300	DO [n] [param]	[n] = 1 to 2
DR4500	DO [n] [param]	[n] = 1 to 6
UDC2300	DO [n] [param]	[n] = 1 to 3
UDC3300	DO [n] [param]	[n] = 1 to 3
UMC800	DO [n] [param]	[n] = 1 to 256
HC900 Hybrid controller.	DO [n] [param]	[n] = 1 to 256
TrendView	DO [n] [param]	[n] = 1 to 32

Parameters

The following table lists the details of the Digital Output Table parameters.

Param	Address Line	Param Format	Access	Devices
Digital Output Value	DO [n] VALUE1	Discrete (bits). [Status Point A type of standard point that is used to represent discrete or digital field values. See also: dual-bit status point, standard point. Only]	RO	DPR180, DPR250
Digital Output Value	DO [n] VALUE2	Discrete (bits). [Status Point Only]	RW	DR4300, DR4500
Digital Output Value	DO [n] VALUE ¹	Discrete (bits). [Status Point Only]	RO	UDC2300, UDC3300, UMC800, HC9003, TV

Param

Address Line

Param Format

Access

Devices

Digital Output Value

DO [n] VALUE1

Discrete (bits).

[Status Point A type of standard point that is used to represent discrete or digital field values. See also: dual-bit status point, standard point. Only]

DPR180, DPR250

Digital Output Value

DO [n] VALUE2

Discrete (bits).

[Status Point Only]

DR4300, DR4500

Digital Output Value

DO [n] VALUE ¹

Discrete (bits).

[Status Point Only]

UDC2300, UDC3300, UMC800, HC9003, TV