Digital input table

Devices supported

ATTENTION: Digital Input values reside in table 1. Therefore, they are not applicable for controllers with a Data Table setting of Holding Registers Lower or Holding Registers Upper.

The following table lists the devices that support the Digital Input Table, and their formats.

Device	Supported Address Format	Range
DPR180	DI Digital input. Compare: AI. See also: input. [n] [param]	[n] = 1 to 36
DPR250	DI [n] [param]	[n] = 1 to 48
DR4300	DI [n] [param]	[n] = 1 to 2
DR4500	DI [n] [param]	[n] = 1 to 2
UDC3300	DI [n] [param]	[n] = 1 to 2
UMC800	DI [n] [param]	[n] = 1 to 256
HC900 Hybrid controller.	DI [n] [param]	[n] = 1 to 256
TrendView	DI [n] [param]	[n] = 1 to 32

Parameters

The following table lists the details of the Digital Input Table parameters.

Param	Address Line	Param Format	Access	Devices
Digital Input Value Read-only values that are usually scanned from the controller registers but can be from other server addresses. Input values can represent eight discrete states. Up to three values can be read from an address in order to determine a state. See also: controller, scanning.	DI [n] VALUE1 The default Parameter if only 'DI [n]' is entered.	Discrete (bits). [Status Point A type of standard point that is used to represent discrete or digital field values. See also: dual-bit status point, standard point. Only]	RO	DPR180, DPR250
Digital Input Value	DI [n] VALUE2 The default Parameter if only 'DI [n]' is entered.	Discrete (bits). [Status Point Only]	RO	DR4300, DR4500, UDC3300, UMC800, HC9003 Applies to Rack 1 only, allocation is 16 inputs (bits) per slot, 12 slots maximum., TV